The CONVUM SGE series e-Hand is an electric vacuum gripper with an integrated pump for robotic pick-and-place operations. It generates vacuum without an external compressed air supply and combines suction control with a built-in pressure display and suction confirmation output. Small and medium versions accommodate different vacuum pad connections, while medium versions also offer balloon hand configurations. The DOBOT+ plug-in provides connection setup, status monitoring, and suction and release control for compatible DOBOT CRA and Nova robots.
Integrated Vacuum Pump
The built-in electric pump generates vacuum directly at the end effector, eliminating the need for an external compressed air source and pneumatic supply hoses.
Automatic Pump Stop and Vacuum Holding
The pump stops automatically when the preset vacuum pressure is reached. An internal valve maintains vacuum during this automatic stop, reducing continuous pump operation.
Lockable Floating Mechanism
A Z-axis floating stroke of up to 15 mm supports contact with the workpiece. The mechanism can be enabled or mechanically locked to suit the suction cup and task.
DOBOT+ Plug-in Control
The plug-in supports connection setup, operation testing, device status monitoring, and suction and release commands within the supported DOBOT software environment.
Vacuum Pick and Place
Picks up, transfers, and releases cardboard and other suitable workpieces using suction cups selected for their surface condition, shape, and weight.
| Parameter | Specification | Notes |
|---|---|---|
| Product model | EVE-500 | e-VEE product family |
| Free air displacement | 7.5 L/min | No-load pump specification |
| Rated voltage | 24 V DC | |
| Maximum power consumption | 14.4 W | Maximum instantaneous value during operation |
| Maximum current | 0.6 A | Excluding inrush current |
| Motor type | DC brushless motor | |
| I/O signal type | PNP or NPN | Model-dependent |
| I/O connector | M8 circular connector, 8-pin male | |
| Floating stroke | 15 mm in the Z-axis direction | With mechanical lock |
| Operating modes | Program mode and timer mode | Selected on the device |
| Timer setting range | 2–30 seconds | Adjusted using the device’s timer dial |
| Main unit dimensions | 104 × 96 × 80 mm (W × D × H) | Excluding protrusions |
| Main unit weight | EVE-500-NK: 0.92 kg; EVE-500-KO/KOM: 0.94 kg | Manufacturer configuration variants |
| Operating temperature | 0–40 °C | |
| Operating humidity | 30–75% RH | Non-condensing |
PNP/NPN signal types and mounting variants describe the manufacturer’s available configurations. The selected configuration must match the robot installation.
| Parameter | Requirement |
|---|---|
| Compatible robot series | DOBOT CRA series; DOBOT Nova series |
| Minimum software — CRA series | DobotStudio Pro V4.6.6.0-stable or later |
| Minimum software — Nova series | DobotStudio Pro V4.6.6.0-stable or later |
| Integration method | DOBOT+ plug-in |
| Supported functions | Connection setup and testing, device status monitoring, suction control, and release control |
| Item | Details |
|---|---|
| Plug-in name and version | NittoKohkiEVEE_v1-0-0-stable |
| Plug-in download | Download the NITTO KOHKI e-VEE DOBOT+ Plug-in |
| Manufacturer hardware manual | e-VEE Instruction Manual |
A compatible robot connection cable is required. Under NITTO KOHKI’s standard supply conditions, this cable is ordered separately. Cable selection must match the robot’s connector pin assignment.
Become a Dobot+ member to accelerate automation transformation in the world. Together we can maximize the impact of our products.
Take part in automation transformation. Let’s work together towards a more efficient tomorrow.