The OnRobot 3FG15 and 3FG25 are electric three-finger grippers for cylindrical workpieces in CNC machine tending, material handling, and assembly. Their centric design automatically centers parts, while internal and external gripping accommodate different workpiece geometries. Configurable fingers and fingertips support a range of part sizes. The 3FG15 offers a maximum form-fit payload of 15 kg, while the 3FG25 supports up to 25 kg. The DOBOT+ plug-in enables gripper configuration, gripping and release control, and grip detection on compatible DOBOT robots.
Centric Three-Finger Design
Three coordinated fingers center cylindrical workpieces during gripping, supporting stable handling and positioning when loading parts into machine chucks or transferring components between operations.
Internal and External Gripping
Both models can grip around a workpiece or expand inside a bore. Finger mounting positions and interchangeable fingertips accommodate different diameters and contact requirements.
Model-Specific Gripping Capacity
The 3FG15 provides normal gripping force from 10 to 240 N, while the 3FG25 provides 50 to 450 N. Available force depends on the gripping configuration and operating conditions.
Electric Drive and IP67 Protection
Both models feature integrated electric motors and IP67-rated gripper construction. The 3FG25 is designed for demanding machining environments involving coolant and chips.
DOBOT+ Programming Support
The plug-in supports internal and external gripping, target diameter and force settings, release control, and grip detection, with Blockly and script commands for robot program integration.
CNC Machine Tending
Load and unload cylindrical workpieces in CNC lathes and other machining equipment using centric gripping for positioning in machine chucks.
Material Handling
Transfer, sort, and package parts using internal or external gripping, with finger configurations selected for the workpiece size and geometry.
Assembly and Insertion
Grip and position cylindrical components for insertion and mounting operations using three-point contact and adjustable gripping force.
The following values describe the gripper hardware.
| Parameter | 3FG15 | 3FG25 |
|---|---|---|
| Maximum force-fit payload — normal grip | 10 kg | 15 kg |
| Maximum force-fit payload — flexible grip | 8 kg | 10 kg |
| Maximum form-fit payload | 15 kg | 25 kg |
| External gripping diameter | 4–152 mm | 18–155 mm |
| Internal gripping diameter | 35–176 mm | 41–184 mm |
| Gripping force — normal grip | 10–240 N | 50–450 N |
| Gripping force — flexible grip | 10–140 N | 50–300 N |
| Finger position resolution | 0.1 mm, typical | 0.1 mm, typical |
| Diameter repeatability | 0.1 mm typical; 0.2 mm maximum | 0.1 mm typical; 0.2 mm maximum |
| Maximum gripping speed — diameter change | 125 mm/s | 90 mm/s |
| Supply voltage | 24 V DC nominal; 20–25 V DC range | 24 V DC nominal; 20–25 V DC range |
| Dimensions, L × W × Ø | 156 × 158 × 180 mm | 156 × 168 × 187 mm |
| Gripper weight | 1.15 kg | 1.6 kg |
| Gripper protection rating | IP67 | IP67 |
Gripping diameter ranges cover different supplied finger positions and fingertip sizes; the full range is not available with one unchanged configuration.
Force-fit gripping relies on friction, while form-fit gripping uses the workpiece geometry to support the load. Actual capacity depends on the workpiece, finger configuration, gripping method, electrical supply, and robot payload limits. The robot must accommodate the combined weight of the gripper, mounting hardware, and workpiece.
Gripping force and speed vary with finger angle, target diameter, and available current. Manufacturer hardware ratings do not specify the achievable performance of every robot connection configuration.
| Compatible Robot Series | Minimum DobotStudio Pro Version |
|---|---|
| DOBOT CRA series | V4.6.6.0-stable or later |
| DOBOT Nova series | V4.6.6.0-stable or later |
| DOBOT CRH series | V4.7.2.0-stable or later |
Integration Method: DOBOT+ plug-in
Controller: V4 controller
| Resource | Version | Link |
|---|---|---|
| OnRobot plug-in | OnRobot_v2-3-0-stable | Download OnRobot Plug-in |
| OnRobot Gripper User Guide — English | V2.2, V4 Controller | Download English User Guide |
| OnRobot Gripper User Guide — Chinese | V2.2, V4 Controller | Download Chinese User Guide |
Installation uses an OnRobot Quick Changer with one of the following connection arrangements:
Dual Quick Changer configurations require the Compute Box connection. Installation and connection details are provided in the user guide.
Become a Dobot+ member to accelerate automation transformation in the world. Together we can maximize the impact of our products.
Take part in automation transformation. Let’s work together towards a more efficient tomorrow.