The Robotiq PowerPick Multi is a compressed-air-powered vacuum gripper designed to handle cardboard cases of different sizes in palletizing and pick-and-place applications. The Dobot+ plug-in provides plug-and-play gripper control for the DOBOT CR20A, CR30A, and CR30H once the gripper is wired to the robot control cabinet, an external compressed air supply is connected, and the plug-in is configured in DobotStudio Pro.
Two Vacuum Zones
The gripper’s two vacuum channels can operate independently to support single- or dual-case picks when the case dimensions and pickup positions are suitable.
24-Cup Suction Array
The standard array uses 52 mm suction cups distributed across the gripping face, providing multiple contact positions for cases with different footprints.
Pneumatic Blow-Off
The gripper uses a pulse of compressed air during blow-off to help separate the suction cups from the case at the placement point.
Case Palletizing
Picks cardboard cases from an infeed and places them onto a pallet in the required stacking pattern.
Case Pick and Place
Transfers cardboard cases between stations where the suction cups can make suitable contact with the case surface.
| Parameter | Specification |
|---|---|
| Gripper type | Pneumatic vacuum gripper |
| Vacuum generation | Integrated Venturi generator |
| Vacuum zones | 2 |
| Standard suction cups | 24 × 52 mm double-bellows cups |
| Suction cup thread | G 1/4 (BSPP) |
| Compressed air supply | External supply required. Dry, filtered air meeting ISO 8573-1 Class 7.4.4 |
| Inlet air pressure | 3–8 bar (43.5–116 psi), with 6.5 bar (94.3 psi) specified as the optimum for compressed air consumption |
| Air consumption | 276 L/min at 3 bar, 476 L/min at 6.5 bar, and 542 L/min at 8 bar |
| Compressed air tubing | 12 mm outside diameter |
| Maximum vacuum level | 92% at 6.5 bar |
| Maximum vacuum flow | 392 L/min at 6.5 bar |
| Gripping time | 0.14 s |
| Release time | 0.04 s with blow-off |
| Nominal supply voltage | 24 VDC ±10% |
| Peak current | 200 mA |
Allowable case weight depends on the robot model, gripper configuration, and operating conditions.
| DOBOT robot | Minimum DobotStudio Pro version |
|---|---|
| CR20A | V4.6.7.0-stable or later |
| CR30A | V4.6.7.0-stable or later |
| CR30H | V4.7.3.1-stable or later |
The Dobot+ plug-in supports gripper control exclusively through the robot control cabinet I/O on all three models.
Become a Dobot+ member to accelerate automation transformation in the world. Together we can maximize the impact of our products.
Take part in automation transformation. Let’s work together towards a more efficient tomorrow.